(a) All track shall be inspected in accordance with the schedule prescribed in paragraph (c) of this section by a person designated under Sec. 213.7.
(b) Each inspection shall be made on foot or by riding over the track in a vehicle at a speed that allows the person making the inspection to visually inspect the track structure for compliance with this part. However, mechanical, electrical, and other track inspection devices may be used to supplement visual inspection. If a vehicle is used for visual inspection, the speed of the vehicle may not be more than 5 miles per hour when passing over track crossings and turnouts, otherwise, the inspection vehicle speed shall be at the sole discretion of the inspector, based on track conditions and inspection requirements. When riding over the track in a vehicle, the inspection will be subject to the following conditions--
(1) One inspector in a vehicle may inspect up to two tracks at one time provided that the inspector's visibility remains unobstructed by any cause and that the second track is not centered more than 30 feet from the track upon which the inspector is riding;
(2) Two inspectors in one vehicle may inspect up to four tracks at a time provided that the inspectors' visibility remains unobstructed by any cause and that each track being inspected is centered within 39 feet from the track upon which the inspectors are riding;
(3) Each main track is actually traversed by the vehicle or inspected on foot at least once every two weeks, and each siding is actually traversed by the vehicle or inspected on foot at least once every month. On high density commuter railroad lines where track time does not permit an on track vehicle inspection, and where track centers are 15 foot or less, the requirements of this paragraph (b)(3) will not apply; and
(4) Track inspection records shall indicate which track(s) are traversed by the vehicle or inspected on foot as outlined in paragraph (b)(3) of this section.
(c) Each track inspection shall be made in accordance with the following schedule-- ------------------------------------------------------------------------
Class of track Type of track Required frequency------------------------------------------------------------------------Excepted track and Class 1, Main track and Weekly with at least
2, and 3 track. sidings. 3 calendar days
interval between
inspections, or
before use, if the
track is used less
than once a week,
or twice weekly
with at least 1
calendar day
interval between
inspections, if the
track carries
passenger trains or
more than 10
million gross tons
of traffic during
the preceding
calendar year.Excepted track and Class 1, Other than main Monthly with at
2, and 3 track. track and sidings. least 20 calendar
days interval
between
inspections.Class 4 and 5 track......... .................... Twice weekly with at
least 1 calendar
day interval
between
inspections.------------------------------------------------------------------------
(d) If the person making the inspection finds a deviation from the requirements of this part, the inspector shall immediately initiate remedial action.
Note to Sec. 213.233: Except as provided in paragraph (b) of this section, no part of this section will in any way be construed to limit the inspector's discretion as it involves inspection speed and sight distance.