Section 213.1
|
Application |
Section 213.3
|
Excepted track |
Section 213.4
|
Responsibility for compliance |
Section 213.5
|
Designation of qualified persons to supervise certain renewals and inspect track |
Section 213.7
|
Classes of track: operating speed limits |
Section 213.9
|
Restoration or renewal of track under traffic conditions |
Section 213.11
|
Measuring track not under load |
Section 213.13
|
Application of requirements to curved track |
Section 213.14
|
Penalties |
Section 213.15
|
Waivers |
Section 213.17
|
Information collection |
Section 213.19
|
Scope |
Section 213.31
|
Drainage |
Section 213.33
|
Vegetation |
Section 213.37
|
Scope |
Section 213.51
|
Gage |
Section 213.53
|
Track alinement |
Section 213.55
|
Curves; elevation and speed limitations |
Section 213.57
|
Elevation of curved track; runoff |
Section 213.59
|
Track surface |
Section 213.63
|
Combined track alinement and surface deviations |
Section 213.65
|
Scope |
Section 213.101
|
Ballast; general |
Section 213.103
|
Crossties |
Section 213.109
|
Gage restraint measurement systems |
Section 213.110
|
Defective rails |
Section 213.113
|
Rail end mismatch |
Section 213.115
|
Continuous welded rail (CWR); plan review and approval |
Section 213.118
|
Continuous welded rail (CWR); plan contents |
Section 213.119
|
Rail joints |
Section 213.121
|
Torch cut rail |
Section 213.122
|
Tie plates |
Section 213.123
|
Rail fastening systems |
Section 213.127
|
Turnouts and track crossings generally |
Section 213.133
|
Switches |
Section 213.135
|
Frogs |
Section 213.137
|
Spring rail frogs |
Section 213.139
|
Self-guarded frogs |
Section 213.141
|
Frog guard rails and guard faces; gage |
Section 213.143
|
Scope |
Section 213.201
|
Derails |
Section 213.205
|
Scope |
Section 213.231
|
Track inspections |
Section 213.233
|
Automated inspection of track constructed with concrete crossties |
Section 213.234
|
Inspection of switches, track crossings, and lift rail assemblies or other transition devices on moveable bridges |
Section 213.235
|
Inspection of rail |
Section 213.237
|
Qualified operator |
Section 213.238
|
Special inspections |
Section 213.239
|
Inspection records |
Section 213.241
|
Scope of subpart |
Section 213.301
|
Responsibility for compliance |
Section 213.303
|
Designation of qualified individuals; general qualifications |
Section 213.305
|
Classes of track: operating speed limits |
Section 213.307
|
Restoration or renewal of track under traffic conditions |
Section 213.309
|
Measuring track not under load |
Section 213.311
|
Application of requirements to curved track |
Section 213.313
|
Waivers |
Section 213.317
|
Drainage |
Section 213.319
|
Vegetation |
Section 213.321
|
Track gage |
Section 213.323
|
Track alinement |
Section 213.327
|
Curves; elevation and speed limitations |
Section 213.329
|
Track surface |
Section 213.331
|
Combined track alinement and surface deviations |
Section 213.332
|
Automated vehicle-based inspection systems |
Section 213.333
|
Ballast; general |
Section 213.334
|
Crossties |
Section 213.335
|
Defective rails |
Section 213.337
|
Inspection of rail in service |
Section 213.339
|
Initial inspection of new rail and welds |
Section 213.341
|
Continuous welded rail (CWR) |
Section 213.343
|
Vehicle/track system qualification |
Section 213.345
|
Automotive or railroad crossings at grade |
Section 213.347
|
Rail end mismatch |
Section 213.349
|
Rail joints |
Section 213.351
|
Torch cut rail |
Section 213.352
|
Turnouts, crossovers, and lift rail assemblies or other transition devices on moveable bridges |
Section 213.353
|
Frog guard rails and guard faces; gage |
Section 213.355
|
Derails |
Section 213.357
|
Track stiffness |
Section 213.359
|
Right of way |
Section 213.361
|
Visual inspections |
Section 213.365
|
Special inspections |
Section 213.367
|
Inspection records |
Section 213.369
|
Purpose and scope |