(a) Each baggage and cargo compartment must:
(1) Be designed for its placarded maximum weight of contents and for the critical load distributions at the appropriate maximum load factors corresponding to the flight and ground load conditions of this part.
(2) Have means to prevent the contents of any compartment from becoming a hazard by shifting, and to protect any controls, wiring, lines, equipment or accessories whose damage or failure would affect safe operations.
(3) Have a means to protect occupants from injury by the contents of any compartment, located aft of the occupants and separated by structure, when the ultimate forward inertial load factor is 9g and assuming the maximum allowed baggage or cargo weight for the compartment.
(b) Designs that provide for baggage or cargo to be carried in the same compartment as passengers must have a means to protect the occupants from injury when the baggage or cargo is subjected to the inertial loads resulting from the ultimate static load factors of Sec. 23.561(b)(3), assuming the maximum allowed baggage or cargo weight for the compartment.
(c) For airplanes that are used only for the carriage of cargo, the flightcrew emergency exits must meet the requirements of Sec. 23.807 under any cargo loading conditions. [Doc. No. 27806, 61 FR 5167, Feb. 9, 1996]